Pioneer DVR-115D problem

[John Navas]

On Mon, 18 Feb 2008 05:15:33 -0500, DeeBee

I have recently installed the above DVR in my PC. Installed it as
"master" on secondary IDE channel with a Pioneer DVR-A06 as slave on the
same channel. Am running XP SP2. At first the 115D would write to any
media but had trouble reading them. Sometimes I couldn't see the
written files and sometimes I could see them but not open or copy them.
However, the A06 could read all media and files written by the 115D !
I temporarily solved the problem by re-installing the ASPI drivers but
this solution did not last and the problem returned after a few hours.
I have found another solution which is to disconnect the A06 completely
leaving only the 115D on the channel. It now read/writes fine.
However, I really would like to have 2 optical drives. Can anyone shed
any light (no pun intended) on this drive problem ? I am using 40 wire
cables although 80 wire is recommended for the 115D. Could this be the
cause of the problem ? (PS I used to have a CD-RW drive as master with
the A06 and that combination gave no problems).
Thanks for any input you can provide.

Wrong newsgroup.
Cross-posted and follow-up set to comp.publish.cdrom.hardware

[smh]

. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/38wte6

(No Mikey S-Lickers have been able to prove ANY of the above )
(is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
'

I have recently installed the above DVR in my PC. Installed it as
"master" on secondary IDE channel with a Pioneer DVR-A06 as slave on the
same channel. Am running XP SP2. At first the 115D would write to any
media but had trouble reading them. Sometimes I couldn't see the
written files and sometimes I could see them but not open or copy them.
However, the A06 could read all media and files written by the 115D !
I temporarily solved the problem by re-installing the ASPI drivers but
this solution did not last and the problem returned after a few hours.

See what [Nero InfoTool, ASPI tab] says about aspi before and after the
trouble:
http://www.nero.com/enu/support-nero8-tools-utilities.html

I have found another solution which is to disconnect the A06 completely
leaving only the 115D on the channel. It now read/writes fine.
However, I really would like to have 2 optical drives. Can anyone shed
any light (no pun intended) on this drive problem ? I am using 40 wire
cables although 80 wire is recommended for the 115D. Could this be the
cause of the problem ? (PS I used to have a CD-RW drive as master with
the A06 and that combination gave no problems).

If 80-wire is called for, by all means use 80-wire cable. From your
description the 40-wire must be picking up noises/interference.

"ATA133" should be 80-wire:

http://tinyurl.com/2os4dk
< http://www.newegg.com/Product/ProductList.aspx
?Submit=ENE&DEPA=0&Description=ide+cable&x=0&y=0 >